醫療器械外殼是保護器械內部部件免受損壞的重要部分，正確的維護和保養可以延長醫療器械外殼的壽命。以下是醫療器械外殼的更換與延長壽命的方法：

The medical device casing is an important part of protecting the internal components of the device from damage, and proper maintenance and upkeep can extend the lifespan of the medical device casing. The following are methods for replacing and extending the lifespan of medical device shells:

醫療器械外殼的更換：

Replacement of medical device casing:

1.確認故障：在更換外殼前，需要確認器械的故障是否因為外殼損壞導致。如果是因為其他部件故障，需要行維修或更換。

1. Confirm the malfunction: Before replacing the casing, it is necessary to confirm whether the malfunction of the instrument is caused by the casing damage. If it is due to other component failures, it needs to be repaired or replaced first.

2.拆卸外殼：按照說明書或操作指南，操作員需要拆卸原外殼。有些外殼可能需要拆卸部件或使用特殊工具。

2. Disassembling the casing: According to the instructions or operating instructions, the operator needs to disassemble the original casing. Some shells may require disassembly of components or the use of special tools.

3.更換新外殼：根據器械的型號和規格，將新的外殼安裝。可參考說明書或操作指南，按照正確的方法進行組裝。

3. Replace with a new casing: Install the new casing according to the model and specifications of the device. You can refer to the manual or operating instructions and assemble according to the correct method.

4.測試：更換完成后，需要進行測試以確保器械的正常工作。測試可能包括機械性能、電氣性能、尺寸規格等方面的測試。

4. Testing: After the replacement is completed, testing is required to ensure the normal operation of the device. Testing may include testing of mechanical performance, electrical performance, dimensional specifications, and other aspects.

5.清洗：更換外殼后，需要對器械進行清洗，確保器械符合衛生要求。

5. Cleaning and disinfection: After replacing the casing, the instrument needs to be cleaned and disinfected to ensure that it meets hygiene requirements.

需要注意的是，如果不是人員，不要擅自拆卸或更換醫療器械外殼，以免造成二次污染或操作失誤導致器械無法正常使用。

It should be noted that if you are not a professional, do not disassemble or replace the medical device casing without authorization, to avoid secondary pollution or operational errors that may cause the device to not function properly.

醫療器械外殼延長壽命的方法：

Method for extending the lifespan of medical device casings:

1.避免碰撞和摩擦：醫療器械使用時需要避免碰撞和摩擦，避免撞擊或刮擦外殼。

1. Avoid collision and friction: When using medical devices, it is necessary to avoid collision and friction, and to avoid hitting or scratching the outer shell.

2.定期清潔：定期清潔醫療器械外殼，防止灰塵和污垢在外殼上積聚，并用干凈的軟布擦拭干燥。

2. Regular cleaning: Regularly clean the medical device casing to prevent dust and dirt from accumulating on the casing, and wipe dry with a clean soft cloth.

3.避免暴露在陽光下：醫療器械不應當暴露在陽光下或潮濕的環境中，以避免外殼受到損壞。

3. Avoid exposure to sunlight: Medical devices should not be exposed to sunlight or damp environments to avoid damage to the casing.

4.避免使用化學品清洗：醫療器械不應當使用化學清潔劑和腐蝕劑清洗，這些物質會損壞外殼材料。

4. Avoid using chemicals for cleaning: Medical devices should not be cleaned with chemical cleaners and corrosives, as these substances can damage the shell material.

5.定期檢查：定期檢查醫療器械外殼是否有裂紋、變形或松動等現象，及時進行處理。

5. Regular inspection: Regularly inspect the casing of medical devices for cracks, deformation, or looseness, and promptly handle them.

6.技術保養：定期進行技術保養，保持醫療器械的正常性能，避免因性能異常導致外殼損壞。

6. Technical maintenance: Regular professional technical maintenance is carried out to maintain the normal performance of medical devices and avoid shell damage caused by abnormal performance.

以上幾個步驟可以延長醫療器械外殼的壽命，也可以保障醫療器械的正常使用。還有什么事情就來咨詢我們http://www.yigiba.com吧！

The above steps can extend the lifespan of the medical device casing and also ensure the normal use of the medical device. If you have anything else, come and consult us http://www.yigiba.com Come on!